Panasonic TV Remote is Not Working (Most Common Reasons and Best Fixes)

Is your Panasonic TV remote control unresponsive? There is no need to panic! Today, we’re bringing you a list of the 6 most common reasons why your Panasonic TV remote isn’t working and the easiest ways to solve the issue!

Panasonic TV Remote is Not Working


TOP FIXES

Check if something is blocking the signal – remove any obstacles and keep a clear line of sight between the TV and your remote

Replace the batteries 

Reset the remote – remove batteries and press the power button for 60sec. Then, press each button a few times.

Check the infrared sensor on your remote and your TV – if it’s not working, you may have to replace it (or call a technician)

Clean the remote (inside and out)

There might be something wrong with your TV – try using the buttons on the TV to control it. Try restarting the TV. If that doesn’t work, try resetting it to factory settings.

Buy a replacement remote 


1. Something is Blocking the Signal

To control the functions of the TV, the Infrared emitter on your remote needs to reach the Infrared sensor on your Panasonic TV. The majority of today’s remote controls can surpass minor objects standing between them and the TV, which is why most people don’t think about possible disruptions that may be causing them issues with the remote.

If you have an older remote, these disruptions are definitely something to worry about. That’s because objects and appliances between you and the TV can make the connection more difficult and make the TV unresponsive to your commands. Luckily, this problem will be easy to fix.

First of all, you should examine the position of your TV. You’ll need to place it so that the signal receiver, which is usually located at the bottom of the TV, is easy to reach. So, when you’re pointing the remote, you should point it directly at the IR light on the television.

What’s more, you should remove any large pieces of furniture and electronics that may be blocking the TV. When you’re using the remote, you shouldn’t be further than three feet away from the TV. After you’ve made all of these adjustments, you can test out the remote control to see if it’s working.

2. Your Remote Control is Too Dirty

Dirt and dust can definitely affect the effectiveness of your remote control. A dirty IR sensor will start working poorly over time. Furthermore, dirt can get stuck between the buttons and jam them. Therefore, it’s helpful to make a habit of cleaning your gadget every now and then.

You only need some alcohol and a cloth to clean your remote properly. You should take extra care of the upper part of the remote control, as that’s the part responsible for the connection to the TV. You can also use a cotton swab for a more detailed cleaning process.

Every once in a while, you should also clean the battery compartment. You’ll have to remove the batteries, and then take a cotton swab to wipe the dirt off of the whole compartment. You should leave the remote for a minute or two before placing your batteries back in.

How to Open and Clean Your Panasonic TV Remote

3. The Remote Needs a Reset

The easiest way to reset your Panasonic TV remote control is to first remove the batteries from the compartment. When the batteries are removed, you should press each button on the remote at least once. You can then put the batteries back in and test out the remote control.

Here’s a Fix that Works on Any Remote

4. Low Batteries

If you suspect that the batteries on your remote are too old, you should replace them. Before you do that, you can test them out by simply taking them out of the compartment for a minute or two. There’s a huge chance that they’ll start working once you insert them back into the remote. In case they aren’t, you should get a set of new ones and try them out.

You shouldn’t mix different battery types and it’s best to avoid the rechargeable ones if you can. When you’re placing your new batteries, you should make sure that they match the polarity that’s written inside the compartment.

5. The Infrared Sensor is Not Working

Your remote control won’t be responding to your commands if the IR sensor isn’t working. There is an easy way to check whether that’s the cause of your issue.

For this process, you’ll need a digital camera or the camera app on your phone. That’s because your eye likely won’t be able to detect the light from the IR signal. Thankfully, your camera can.

Firstly, you should turn the camera on and point it to the remote control. Then, you should press a few buttons on the remote. If you see a light flashing, the IR sensor is working. In case you don’t see the light, your sensor is damaged and you’ll have to replace it. You should also consider replacing the whole remote, especially if you’ve been using it for a long time.

6. The TV is Not Working

The simplest solution for getting your TV to start working is to perform a power cycle. You’ll do that by unplugging it from the electrical socket. Next, you should leave it off for a minute or two and plug it back in. Then, you can test out the remote. If that didn’t work, you should contact Panasonic customer support and report your issue.

In Conclusion

With our easy solutions, you should be able to repair your Panasonic TV remote in a matter of minutes. In case you’re still having the same issue, you might have to replace your remote control. Moreover, you can contact Panasonic customer service and report the problem if you suspect that the TV is at fault.


Frequently Asked Question

Question: How to factory reset the Panasonic TV?

Answer: The process of resetting the Panasonic TV largely depends on the model. Most Panasonic TVs can be reset by going to the Menu and then finding the Setup option. After that, you should click on System and confirm your choice. Then, you’ll see the option Factory default. You should choose that one and press Yes to complete the command.

Resetting a Panasonic TV to Factory Default Settings

Question: Why is Panasonic TV not responding to the remote’s commands?

Answer: Many things can cause your Panasonic TV to stop responding to the remote’s commands. The batteries on the remote could be low or your remote may need a reset. Your Panasonic TV could also be to blame for your problem. If that’s the case, you should perform a simple power cycle on the TV as that removes most of the bugs that can create an issue of this kind.

Question: How do I unfreeze my TV remote?

Answer: The easiest way to unfreeze the TV remote is to open the battery compartment and remove the batteries from the gadget. You should leave your remote for a couple of minutes. After that, you can put the batteries back in and test out the remote control. 


 

Leave a Reply